Lacing machine- The nipples are not coming out of the nipple block

During the lacing process, the nipples stop coming out of the nipple guide, but the issue is not a shortage of nipples.

There are two possibilities for this problem:

• Check if the transport hose is crushed at any point. This can cause the nipples to get stuck in the hose.

• Check if there is too much oil on the nipples, as this can also cause them to get stuck. (Reduce the amount of oil applied to the nipples.)

In both cases, remove the transportation hose

Aim the hose toward the nipple container.

while in this menu

Press F7 > Air pulse on/off in nipple transport hose.
All the jammed nipples will come out. Put the hose back in the correct position and test again during the working process.