Maintenance
      Back to home
      1. Help Center
      2. MB- Head set press
      3. Maintenance

      Head set press MB-Machine does not activate the cylinder

      During the work process, it is noticed that the cylinder does not have enough strength.

      It could be any of the following causes:

      When the compressed air is switched off or the machine’s air pressure is not reaching 5 bar due to leakage, or if the line air pressure is lower than the machine’s air pressure, check:

      • Check that the Main Air Disconnect valve is open.
      • Verify that there is pressure in the supply network.
      • Check the machine for any leakage.

      • Switch on the compressed air or repair the leakage in the line pressure