General Trueing- Machine receiving wheel incorrectly

Wheel entering the machine and sitting incorrectly on the hub support

On the initial screen, go to Test, then search for the line 'Test Machine Sequence.' After that, place a rim on the machine's entry rail. Using the up and down arrows, scroll down to the third line, 'Hub clamps inside,' "In this option, a caption will appear. Press F7 to move the hub support."

Once in this position, you will be able to check if the height adjustment is correct. Use the F7 button and manually turn the crank to adjust the hub height. 

The hub support clamp should secure the rim correctly. Check if it needs to be raised or lowered by turning the crank. ( 4)

With F7, you can check if everything is correct. Once adjusted, use the up arrow to go back to the first option. Remove the rim and return to automatic mode. If it's not satisfactory, repeat the process.